جهاز التحكم عن بعد اللاسلكي Scanreco RC400 Maxi 8 Pads + 2x JP Joysticks لـ آلات قطع الأشجار

Scanreco G2B Maxi 8 pads, 12/24 V, with 2 JP PWM joysticks.

You can switch between radio control and joysticks in real time at any time, depending on your needs and for ease of use!

This kit is configured for the most common machine settings and supports up to 8 standard functions of forestry cranes. If you require a different dedicated configuration, we can tailor it to your requirements.

The kit is designed for plug-and-play convenience. We take care of everything, from the connectors to the software configuration.

We offer technical support and are available at any time via email, WhatsApp and telephone.

If you have any questions or need assistance, please feel free to contact us at - or -.

Once you have placed your order, the flow rate and pressure can be fully adjusted to the customer’s specific requirements for the machine.

--------------------------------- ---------------------------------------------------------------------------------------------------- ---------------------------

Scanreco G2B Maxi PWM with 8 pads


- 1–8 linear levers

- Stop function in accordance with EN ISO 13849-1 Cat. 3, PL e

- Various toggle switches, push-button switches and rotary switches

- Frequency bands: 433–434 or 902–928 MHz (other frequencies available on request)

- Operating range > 100 m / > ~330 ft.

Protection rating: IP65

Operating temperature: 20 °C to +70 °C / ~4 °F to +160 °F

- Wired control: standard length 10 metres / ~33 feet.

- G2B receiver PWM 12 or 24 VDC power supply

- 8 bidirectional proportional outputs

- Choice of wireless or wired control

- All analogue outputs are programmable for final speed adjustment

- 14 digital outputs (of which 1 is a combined input/output) and 4 digital inputs (of which 1 is a combined input/output)

- One DV output for controlling the drain valve

- Radio communication in the ISM band using frequency-hopping technology

- Manual mode available to bypass the radio system by providing only the DV output, thereby enabling manual control via the hydraulic manifold (where available).

- Programmable logic with block, soak, decelerate and ramp functions, and much more

- Please note that cable harnesses and connector sets are NOT included and must be ordered separately if required.

Dimensions: (W x H x D): 350 x 160 x 190 mm / ~13.78 x 6.30 x 7.48 inches (excluding colour display)

------------------------------------------------------------------------

JP joysticks (details in photos)